2007 Mercedes C-Class Owner's Manual - Page 255

Controls in detail Useful features Warning! G When programming a garage door opener, park outside the garage. Do not run the engine while programming the integrated remote control. Inhalation of exhaust gas is hazardous to your health. All exhaust gas contains carbon monoxide (CO), and inhaling it can cause unconsciousness and possible death. Interior rear view mirror with integrated remote control Before programming the integrated remote control to a garage door opener or gate operator, make sure people and objects are out of the way of the device to prevent potential harm or damage. When programming a garage door opener, the door moves up or down. When programming a gate operator, the gate opens or closes. Do not use the integrated remote control with any garage door opener that lacks safety stop and reverse features as required by U.S. federal safety standards (this includes any garage door opener model manufactured before April 1, 1982). A garage door that cannot detect an object - signaling the door to stop and reverse does not meet current U.S. federal safety standards. Programming the integrated remote control Step 1: Switch on the ignition ( page 32). Step 2: If you have previously programmed a signal transmitter button and wish to retain its programming, proceed to step 3. If you are programming the integrated remote control for the first time, press and hold the two outer signal transmitter buttons 2 and 4 and release them only when indicator lamp 1 be- 1 Indicator lamp 2 3 4 Signal transmitter button Needed for programming (not part of vehicle equipment): 5 Hand-held remote control of garage door opener, gate operator or other device Hand-held remote control button 6 254