2007 Mercedes C-Class Owner's Manual - Page 48

Getting started Driving Automatic transmission* Starting Place the gear selector lever in position P. Do not depress the accelerator. Turn the SmartKey in the starter switch to position 3 ( page 32) and release it again immediately. The engine then starts automatically. For information on turning off the engine, see "Turning off engine" ( page 55). Starting difficulties If the SmartKey is left in starter switch position 0 for an extended period of time, it can no longer be turned in the switch. In this case, the steering is locked. To unlock, remove SmartKey from starter switch and reinsert. If the engine does not start as described, carry out the following steps: Turn the SmartKey in starter switch to position 0 and repeat the starting procedure ( page 46). Remember that extended starting attempts can drain the vehicle battery. Get a jump start ( page 386). If the engine does not start after several starting attempts, there could be a malfunction in the engine electronics or in the fuel supply system. Notify an authorized Mercedes-Benz Center. Gearshift pattern for automatic transmission P Park position with gear selector lever lock R Reverse gear N Neutral position D Drive position For more information, see "Automatic transmission*" ( page 151). 47