2007 Mercedes G-Class Owner's Manual - Page 120

Controls in detail Lighting Turn the exterior lamp switch to position U. With the SmartKey in starter switch position 1, the tail and parking lamps, the license plate lamps and the side marker lamps will switch on and off depending on the brightness of the ambient light. When the engine is running the low beam headlamps, the tail and parking lamps, the license plate lamps and the side marker lamps will switch on and off depending on the brightness of the ambient light. Daytime running lamp mode In Canada the daytime running lamp mode is mandatory and therefore in a constant mode. By default, the daytime running lamp mode is deactivated. Activate the daytime running lamp mode using the control system, see "Setting daytime running lamp mode (USA only)" ( page 151). Turn the exterior lamp switch to position M or U. When the engine is running, the low beam headlamps are switched on. In low ambient light conditions, the following lamps will switch on additionally: Tail and parking lamps License plate lamps Side marker lamps Canada only: position M or U, you cannot switch on the high beam headlamps. The high beam flasher is available at all times. For nighttime driving turn the exterior lamp switch to position B to permit activation of the high beam headlamps. i With the exterior lamp switch in When the engine is running, and you shift from a driving position to neutral position N or park position P with the vehicle at standstill, the low beam headlamps will switch off with a 3-minute delay. i Canada only: High beam headlamps are only available with the exterior lamp switch in position B. i With the daytime running lamp mode activated and the engine running, you cannot switch off the low beam headlamps manually. 119