2007 Mercedes G-Class Owner's Manual - Page 146

Controls in detail Control system If conditions have occurred causing status messages to be recorded, the number of messages appears in the multifunction display: Warning! G i After you have scrolled through all recorded status messages, the first recorded message appears again. Malfunction and warning messages are only indicated for certain systems and are intentionally not very detailed. The malfunction and warning messages are simply a reminder with respect to the operation of certain systems and do not replace the owner's and/or driver's responsibility to maintain the vehicle's operating safety by having all required maintenance and safety checks performed on the vehicle and by bringing the vehicle to an authorized Mercedes-Benz Light Truck Center to address the malfunction and warning messages ( page 338). Should the vehicle's system record any conditions while driving, the number of messages will reappear in the multifunction display when the SmartKey in the starter switch is turned to position 0 or removed from the starter switch. i The vehicle status message memory will be cleared when you turn the SmartKey in the starter switch to position 1 or 2. You will then only see high-priority messages in the multifunction display ( page 338). 1 Number of messages Press button k or j. The stored messages will now be displayed in the order in which they have occured. For malfunction and warning messages, see "Vehicle status messages in the multifunction display" ( page 338). Press button è or ÿ repeatedly until the vehicle status message memory appears in the multifunction display. 145