2007 Mercedes G-Class Owner's Manual - Page 396

Practical hints Flat tire Press the jack piston in again and close the lowering screw ( page 392). Store the jack in the designated storage compartment ( page 367). After changing the wheel, secure the damaged wheel on the spare wheel carrier ( page 369). Make sure the wheel cannot come loose. Check the tire inflation pressure and correct it if necessary. Follow recommended cold tire inflation pressures listed on the Tire and Loading Information placard on the driver's door B-pillar ( page 280). Warning! G Have the tightening torque checked after changing a wheel. The wheels could come loose if they are not tightened to a torque of 96 lb-ft (130 Nm). Disassemble the pump handle ( page 392). 1 - 5 Wheel bolts Tighten the five wheel bolts evenly, following the diagonal sequence illustrated (1 to 5), until all wheel bolts are tight. Observe a tightening torque of 96 lb-ft (130 Nm). Put the pump handle and the wheel wrench back into the vehicle tool kit. Store the vehicle tool kit in the designated storage compartment ( page 366). 395