2007 Mercedes G-Class Owner's Manual - Page 173

Controls in detail Transfer case Messages in the multifunction display If a shift was not completed and one of the following messages appears in the multifunction display: TC shift conditions not fulfilled TC shift procedure canceled i If the SmartKey is in starter switch position 0 or 1, an alarm will sound if the transfer case is in neutral and the driver's door is opened. Engage the transfer case to gear position HIGH or LOW. The shift did not take place. Repeat the shift procedure. Transfer case Visit workshop The shift did not take place. At least one shift condition was not met. Repeat the shift procedure. TC in neutral There may be a malfunction in the system. Repeat the shift procedure. If the shift procedure still does not take place, have the vehicle checked at an authorized Mercedes-Benz Light Truck Center as soon as possible. For more information, see "Practical hints" section ( page 363). The shift did not take place. The transfer case is in neutral. Gear position N appears in transfer case indicator 1. Repeat the shift procedure. Warning! G If the transfer case is in neutral, transmission position P will not hold vehicle. The parking brake must be applied to hold vehicle in place. 172