2009 Mercedes G-Class Owner's Manual - Page 232

463_AKB; 2; 52, en-US d2ureepe, 2008-12-02T10:52:11+01:00 - Seite 230 Version: 2.11.7.1 230 X Replacing bulbs Insert the bulb socket back into side marker lamp housing ;. X Reinstall dust cover =. X Reinstall side marker lamp housing ;. X Install and tighten securing screws :. i Do not overtighten securing screws :. Otherwise side marker lamp housing ; could be damaged. Replacing bulbs for rear lamps Example illustration: Left tail lamp lens (right tail lamp lens laterally reversed) X X Practical hints Before you start to replace a bulb for a rear lamp, do the following: X X Loosen and remove securing screws :. Remove tail lamp lens ;. Switch off the ignition. Turn the exterior lamp switch to position $. Removing/installing rear lamp guard (G 55 AMG only) Example illustration: Left tail lamp unit (right tail lamp unit laterally reversed) = Turn signal lamp bulb ? Brake, tail, parking and standing lamp bulb A Tail, parking and standing lamp bulb X X Remove screws ;. Swivel rear lamp guard : outward. Make sure the guard does not strike painted surfaces. X Swivel rear lamp guard : back after replacing bulbs and fasten it with screws ;. X Gently press onto respective bulb =, ?, or A and turn counterclockwise out of its bulb socket. X Gently press the new bulb into the bulb socket and turn clockwise until it engages. X Reinstall tail lamp lens ;. X Install and tighten securing screws :. Tail lamp unit X G 55 AMG only: Remove the rear lamp guard.