2009 Mercedes G-Class Owner's Manual - Page 94
2009 Mercedes G-Class Manual
Page 94 highlights
463_AKB; 2; 52, en-US d2ureepe, 2008-12-02T10:52:11+01:00 - Seite 92 Version: 2.11.7.1 92 Transfer case could lead to an accident and cause injury to yourself and others. Please observe related messages appearing in the multifunction display. X Switching from HIGH to LOW Controls in detail ! The shifting procedure can only be performed when the following conditions are met: RThe RThe RThe RThe engine is running. Press lower half ("HIGH") of the transfer case switch. Once the shift is complete, transfer case position H appears in transfer case indicator :. If the shifting procedure does not take place, press lower half ("HIGH") of the transfer case switch once more. X Shift the automatic transmission into drive position D. automatic transmission is in neutral position N. vehicle is not at a standstill. Messages in the multifunction display If a shift was not completed and one of the following messages appears in the multifunction display: RTC vehicle speed does not exceed 25 mph (40 km/h). X Press upper half ("LOW") of the transfer case switch. Once the shift is complete, transfer case position L appears in transfer case indicator :. If the shifting procedure does not take place, press upper half ("LOW") of the transfer case switch once more. X Shift the automatic transmission into drive position D. shift conditions not fulfilled The shift did not take place. At least one shift condition was not met. X Repeat the shifting procedure. in neutral The shift did not take place. The transfer case is in neutral. Transfer case position N appears in transfer case indicator :. X RTC Repeat the shifting procedure. G Warning! Switching from LOW to HIGH ! The shifting procedure can only be performed when the following conditions are met: RThe engine is running. RThe automatic transmission is in neutral position N. RThe RThe If the transfer case is in Neutral, the park position P of the automatic transmission will not hold the vehicle. The parking brake must be engaged to hold the vehicle in place. RTC shift procedure canceled The shift did not take place. X Repeat the shifting procedure. case Visit workshop There may be a malfunction in the system. X Repeat the shifting procedure. If the shifting procedure still does not take place: X Have the vehicle checked at an authorized Mercedes-Benz Center as soon as possible. vehicle is not at a standstill. RTransfer vehicle speed does not exceed 43 mph (70 km/h).
![](/manual_guide/autos/2009-mercedes-gclass-owners-manual-0d7be34/94.png)