2009 Mercedes G-Class Owner's Manual - Page 66

463_AKB; 2; 52, en-US d2ureepe, 2008-12-02T10:52:11+01:00 - Seite 64 Version: 2.11.7.1 64 X Seats Switch on the ignition. Open the respective door. or X Removing and installing front seat head restraints i Tilt the seat backrest rearward for easier removal and installation of the head restraints. Controls in detail X Seat fore and aft adjustment: Press the switch forward or backward in direction of arrow =. X Seat backrest tilt: Press the switch forward or backward in direction of arrow ;. X Seat height: Press the switch up or down in direction of arrow A. X Seat cushion tilt: Press the switch up or down in direction of arrow ? until your upper legs are lightly supported. X Head restraint height: Press the switch up or down in direction of arrow :. Head restraint fore and aft adjustment X Removing: Press switch : upwards and hold until the head restraint is fully extended. X Pull out the head restraint with both hands. X Installing: Press switch : upwards and hold for about 5 seconds. X Insert the head restraint into openings on the seat backrest. i The guide bar with the detent must be on the left. X Push the head restraint down until it engages. X Adjust the head restraint to the desired position. Rear seat head restraints G Warning! For safety reasons, always drive with the rear head restraints in the upright position when the rear seats are occupied. Keep the area around head restraints clear of articles (e.g. clothing) to not obstruct the folding operation of the head restraints. X Adjust the head restraint to the desired position by pushing or pulling on the upper edge of the head restraint cushion.