2009 Mercedes G-Class Owner's Manual - Page 67

463_AKB; 2; 52, en-US d2ureepe, 2008-12-02T10:52:11+01:00 - Seite 65 Version: 2.11.7.1 Seats G Warning! Rear seat head restraints, removing and installing 65 For your protection, drive only with properly positioned head restraints. Adjust the head restraint in such a way that it is as close to the head as possible and the center of the head restraint supports the back of the head at eye level. This will reduce the potential for injury to the head and neck in the event of an accident or similar situation. With a rear seat occupied, make sure to move the respective head restraint up from the lowest non-use position and have the occupant adjust the head restraint properly. Do not drive the vehicle without the seat head restraints installed when the rear seats are occupied. Head restraints are intended to help reduce injuries during an accident. X Removing: Pull out the head restraint with both hands. i The head restraint(s) should be stored in a secure place. X Rear seat head restraint height adjustment Installing: Insert the head restraint into openings on the seat backrest. X Push the head restraint down to the stop. X Adjust the head restraint to the desired position. Multicontour seat The multicontour seat has a movable seat cushion and inflatable air cushions built into the seat backrest to provide additional lumbar and side support. The seat cushion depth, seat backrest cushion-height and curvature can be continuously varied with switches on the inside of each front seat when the ignition is switched on. X Raising: Pull head restraint upward to the desired position. X Lowering: Push head restraint downward to the desired position. Z Controls in detail