2011 Mercedes ML-Class Owner's Manual - Page 197
2011 Mercedes ML-Class Manual
Page 197 highlights
Off-road driving systems indicator = in the multifunction display go out. While indicator lamp ; is flashing, you can cancel the gear change by pressing LOW RANGE button : again. Messages in the multifunction display If a gear change process has not been successful, the following messages may be displayed in the multifunction display: Max. Speed 25 Mph (Canada: 40 Km/h): you have been driving faster than 25 mph (40 km/h). Indicator lamp ; also flashes. X 195 Drive more slowly to carry out the gear change process. From HIGH RANGE to LOW RANGE ! Only carry out the gear change process if: Rthe Rthe engine is running transmission is in position N Ryou are not driving faster than 25 mph (40 km/h) Shift briefly into N: the transmission is in position D and you are driving slower than 25 mph (40 km/h). X Shift the transmission to N to complete the gear change process. Shifting Process Canceled Reactivate: the shifting process has not been completed. X Ensure that all gear change conditions are fulfilled and carry out the gear change process again. Stop vehicle, engage parking brake: a warning tone is also heard. The gear change process has not been completed. LOW RANGE is in the neutral position. There is no connection between the engine and the drive wheels. X Press LOW RANGE button :. Indicator lamp ; flashes. LOW RANGE indicator = appears in the multifunction display. When the gear change is complete, indicator lamp ; lights up. While indicator lamp ; is flashing, you can cancel the gear change by pressing LOW RANGE button : again. From LOW RANGE to HIGH RANGE ! Only carry out the gear change process if: Rthe Rthe engine is running transmission is in position N Ryou are not driving faster than 43 mph (70 km/h) X Press LOW RANGE button :. Indicator lamp ; flashes. If the gear change process has taken place, indicator lamp ; and LOW RANGE ! Do not drive any further, otherwise you could damage the vehicle's drive train. X Stop the vehicle. Take into account the road and traffic conditions when doing this. X Depress the parking brake. X Carry out the gear change process again. If the gear change process has been carried out, the Stop vehicle, engage parking brake message disappears. Z Driving and parking