2011 Mercedes ML-Class Owner's Manual - Page 215

Menus and submenus Route guidance inactive The direction of travel appears in the multifunction display. If the name of the street is part of the navigation system data, this will also be displayed. Example display for vehicles with the Off-Road Pro engineering package 213 Settings menu Introduction Route guidance active The multifunction display shows navigation instructions, for example: Off-road menu Depending on your vehicle's optional equipment, you can set the following current settings to be shown in the Off-road menu: Rlevel control (Y page 181) Rcompass (Y page 279) Rdifferential locks (Y page 196) The Settings menu allows you to: RRestoring the factory settings RChanging the instrument cluster settings RChanging the time/date settings32 RChanging the lighting settings RChanging the vehicle settings RChanging the convenience settings Resetting to factory settings For safety reasons, the Daytime Running Lamps function in the Lighting submenu is only reset if the vehicle is stationary. X Press V or U on the steering wheel to select the Settings menu. X Press and hold the . reset button on the instrument cluster for approximately three seconds. A prompt appears in the multifunction display asking you to confirm by pressing the . reset button again. i Large buildings, power cables or powerful transmission masts as well as metallic objects on or in the vehicle may interfere with the compass display. X Press V or U on the steering wheel to select the Offroad menu. 32 This function is not available in vehicles with the navigation module. Z On-board computer and displays