2011 Mercedes ML-Class Owner's Manual - Page 281

Features Clearing the remote control memory X 279 i You should clear the remote control memory before selling the vehicle. Compass X To call up the compass: press the V or U button on the multifunction steering wheel repeatedly until the AIRMATIC/Compass menu appears in the multifunction display. The compass indicates the direction in which the vehicle is currently driving: N, NE, E, SE, S, SW, W or NW. X X Slide seat backwards. To install: place the floormat in position. X Press floormat eyelets : onto retainer pins ;. X To remove: pull the floormats off retainers ;. X Remove the floormat. Infrared-reflecting windshield The infrared reflecting glass prevents the vehicle interior from becoming too hot. It also blocks radio waves up into the gigahertz range. i If your vehicle is not equipped with the AIRMATIC package, the multifunction display only shows the compass. Floormat on the driver's side G Warning! Whenever you are using a floormat, make sure there is enough clearance and that the floormat is securely fastened. The floormat should always be securely fastened using the fastening equipment. Before driving off, check that the floormat is securely in place and adjust it if necessary. A loose floormat could slip and hinder proper functioning of the pedals. In order to operate radio-controlled equipment, e.g. toll systems, there are areas : on the windshield that are permeable to radio waves. In these areas, you can install radio-controlled systems. These areas can best be seen from outside the Z Loading, stowing and features Turn the SmartKey to position 2 in the ignition lock. X Press and hold transmitter buttons ; and ? for approximately 20 seconds until indicator lamp : flashes rapidly. The memory is cleared. Do not place several floormats on top of each other as this may impair pedal movement.