2011 Mercedes ML-Class Owner's Manual - Page 321
2011 Mercedes ML-Class Manual
Page 321 highlights
Towing and tow-starting Removing the towing eye X X 319 Loosen the towing eye and unscrew it. Attach cover : to the bumper and press until it engages. X Place the towing eye in the vehicle tool kit. The automatic transmission automatically shifts to position P when you open the driver's or front-passenger door or when you remove the SmartKey from the ignition lock. In order to ensure that the automatic transmission stays in position N when towing, do the following: X Towing the vehicle with the rear axle raised Only possible for vehicles without 4MATIC. When having your vehicle towed with the rear axle raised, observe the important safety notes (Y page 317). ! The ignition must be switched off if you are towing the vehicle with the rear axle raised. Intervention by ESP® could otherwise damage the brake system. X Switch on the hazard warning flashers (Y page 109). X Turn the SmartKey to position 0 in the ignition lock and remove the SmartKey. X When leaving the vehicle, take the SmartKey or the KEYLESS-GO key with you. Towing vehicles with both axles on the ground When having your vehicle towed, observe the important safety notes (Y page 317). Make sure that the vehicle is stationary and that the SmartKey is in position 0 in the ignition lock. X Turn the SmartKey to position 2 in the ignition lock. On vehicles with KEYLESS-GO, use the SmartKey instead of the Start/Stop button (Y page 139). X Depress and hold the brake pedal. X Shift the automatic transmission to position N. X Release the brake pedal. X Release the parking brake. X Switch on the hazard warning flashers (Y page 109). X Leave the SmartKey inserted in the ignition lock in position 2. G Warning i When towing with the hazard warning flashers switched on, use the combination switch as usual to signal in which direction you are changing. In this case, only the indicator lamps for the direction of travel flash. When you reset the combination switch, the hazard warning flashers start flashing again. Transporting the vehicle The towing eyes or trailer tow hitch can be used to pull the vehicle onto a trailer or transporter if you wish to transport it. X Turn the SmartKey to position 2 in the ignition lock. X Shift the automatic transmission to position N. With the engine not running, there is no power assistance for the brake and steering systems. In this case, it is important to keep in mind that a considerably higher degree of effort is necessary to brake and steer the vehicle. Adapt your driving accordingly. Z Roadside assistance