1997 Mercury Villager Owner Guide 1st Printing - Page 317
1997 Mercury Villager Manual
Page 317 highlights
Removing the headlamp bulb 1. Make sure that the engine is off and the headlamp switch on the instrument panel is in the OFF position. 2. Remove the electrical connector from the bulb by pulling the connector away from the bulb assembly. The headlamp bulb assembly 3. Remove the bulb retaining ring by turning it counterclockwise 1/8 of a turn to free it from the socket. Then slide the ring off the plastic base. Keep the ring. You must use it again to hold the new bulb in place. 320
320
Removing the headlamp bulb
1.
Make sure that the engine is off and the headlamp switch on
the instrument panel is in the OFF position.
2.
Remove the electrical connector from the bulb by pulling the
connector away from the bulb assembly.
The headlamp bulb assembly
3.
Remove the bulb retaining ring by turning it
counterclockwise 1/8 of a turn to free it from the socket.
Then slide the ring off the plastic base.
Keep the ring.
You
must use it again to hold the new bulb in place.