1999 Mercury Cougar Owner Guide 1st Printing - Page 221
1999 Mercury Cougar Manual
Page 221 highlights
Maintenance and care CAUTION: THE VERTICAL AIM MUST BE ADJUSTED FIRST. You will need a 6 mm Allen wrench or a Phillips screwdriver. If the vehicle has been in an accident, the vehicle's front structure should be properly aligned before aiming the headlamp. Adjusting the vertical aim 1. Park the vehicle on a level surface. 2. The vertical indicator is located on top of the headlamp assembly; the adjusting screw is located behind the headlamp assembly. 3. Turn the vertical adjusting screw until the bubble aligns with the 0" reference mark when viewed from directly above. The 0" reference mark is the middle of the three (3) bold graduation marks. 221
Maintenance
and care
221
CAUTION:THEVERTICALAIM
MUSTBEADJUSTEDFIRST.
Youwillneeda6 mmAllenwrench
oraPhillipsscrewdriver.
Ifthevehiclehasbeeninan
accident,thevehicle'sfront
structureshouldbeproperly
alignedbeforeaimingthe
headlamp.
Adjusting
the vertical aim
1.Parkthevehicle
on a level
surface
.
2.Theverticalindicatorislocated
ontopoftheheadlampassembly;
theadjustingscrewislocated
behindtheheadlampassembly.
3.Turntheverticaladjustingscrew
untilthebubblealignswiththe±0"
referencemarkwhenviewedfrom
directlyabove.The±0"reference
markisthemiddleofthethree(3)
boldgraduationmarks.