1996 Nissan Altima Owner's Manual - Page 75

next broadcasting station. Once the highest broadcasting station is reached, the radio will continue in the "SEEK" mode at the lowest broadcasting station. If using the button, once the lowest broadcasting station is reached, the radio will continue in the ''SEEK'' mode at the highest broadcasting station. Pushing the button again will continue the "SEEK" function. SCAN tuning Push the SEEK/SCAN tuning button or for more than 1.5 seconds. SCAN tuning begins from low to high frequencies or high to low frequencies, depending on which button is pressed. SCAN tuning stops at each broadcasting station for five seconds. Pushing the button again during this five second period will stop SCAN tuning and the radio will remain tuned to that station. AHA0503 than 3 seconds. (For example, in the diagram ch2 is to be memorized. The radio stops playing momentarily when the select button is pushed.) 3. The indicator ''ch2'' will then illuminate in the display and the sound will resume. Memorizing is now complete. 4. Other buttons can be set in the same manner. If the battery cable is disconnected, or if the radio fuse blows, the radio memory will be cancelled. In that case, reset the desired stations. Cassette tape operation Turn the ignition key to ''ACC'' or ''ON'', and then lightly insert the cassette tape into the tape door. The cassette tape will be automatically pulled into the player. The radio or CD will turn off (if it is on) and the cassette tape will begin to play. Do not force the cassette tape into the tape door. Pressing strongly could cause player damage. If the system is turned off by pushing the Station memory operations Six stations can be set for each band. 1. Tune to the desired station. 2. Push the desired select button for more 3-18