1997 Nissan Pickup Owner's Manual - Page 112
1997 Nissan Pickup Manual
Page 112 highlights
ACE1008 SCE0043 CE0141-A Getting the spare tire and tools 1. For King Cab models: a. Move the driver's seat back fully forward. b. Remove the jack and wheel nut wrench from the tool case from behind the driver's seat. c. Remove the jack rod from behind the driver's seat. For standard cab models: a. Move the bench seat back fully forward. b. Remove the jack and jack rod from behind the driver's side of the bench seat. c. Remove the wheel nut wrench from behind the passenger's side of the bench seat. 2. Fit the square end of the jack rod into the square hole of the wheel nut wrench to form a handle. 3. Find the oval shaped opening under the middle of the tailgate. Pass the T-shaped end of the jack rod through the opening and direct it towards the spare tire winch, located directly above the spare tire. 4. Seat the T-shaped end of the jack rod into the T-shaped opening of the spare tire winch, and turn the jack rod counterclockwise to lower the spare tire. 5. Once the spare tire is completely lowered, reach under the vehicle, remove the retainer chain, and carefully slide the tire from under the rear of the vehicle. 5-3