1997 Nissan Pickup Owner's Manual - Page 86

2) Turn the ignition key slightly in the ON direction. 3) Turn the key toward the LOCK position. 4) Remove the key. The shift lever is designed so it cannot be moved out of P and into any of the other gear positions if the ignition key is turned to OFF or if the key is removed from the switch. The shift lever can be moved if the ignition switch is in the ACC position. The shift lever can also be moved if the ignition switch is in the ON position and the foot brake pedal is depressed. To lock the steering wheel, remove the key. To unlock the steering wheel, insert the key and turn it gently while rotating the steering wheel slightly right and left. WARNING Never remove the key while driving. If the key is removed, the steering wheel will lock. This may cause the driver to lose control of the vehicle and could result in serious vehicle damage or personal injury. 4-5 Key positions LOCK Normal parking position (0) OFF (Manual transmission model) (1) The engine can be turned off without locking the steering wheel. When removing the key from the key cylinder, push the key release button at this position and turn the key to LOCK. ACC (Accessories) (2) This position activates electrical accessories such as the radio when the engine is not running. ON (Normal operating position) (3) This position turns on the ignition system and electrical accessories. START (4) This position starts the engine. As soon as the engine has started, release the key. It automatically returns to the ON position. ASD0023 AUTOMATIC TRANSMISSION On automatic transmission models, the ignition lock is designed so the key cannot be turned to LOCK and removed until the shift lever is moved to the P position. When removing the key from the ignition, make sure the shift lever is in the P position. When the key cannot be turned to the LOCK position, proceed as follows to remove the key: 1) Move the shift lever into the P position.