1997 Nissan Pickup Owner's Manual - Page 94
1997 Nissan Pickup Manual
Page 94 highlights
To reset at a slower cruising speed, use one of the following three methods: a) Lightly tap the brake pedal. When the vehicle attains the desired speed, push the COAST/SET switch and release it. b) Push and hold the COAST/SET switch. Release the switch when the vehicle slows down to the desired speed. c) Push, then quickly release the COAST/SET switch. Each time you do this, the set speed decreases by about 1 MPH (1.6 km/h). To resume the preset speed, push and release the RESUME switch. The vehicle returns to the last set cruising speed when the vehicle speed is over 30 MPH (48 km/h). indicator in the instrument cluster then blinks to warn the driver. ● If the cruise indicator blinks, turn the cruise control main switch off and have the system checked by your NISSAN dealer. WARNING Don't use the cruise control when driving under the following conditions: ● it is not possible to keep the vehicle at a set speed. ● in heavy traffic or in traffic that varies in speed. ● on winding or hilly roads. ● on slippery roads (rain, snow, ice, etc.). ● in very windy areas. Doing so could cause a loss of vehicle control and result in an accident. CAUTION On manual transmission models, do not shift into neutral without depressing the clutch pedal when the cruise control is on. Should this occur, depress the clutch pedal and turn the main switch off immediately. Failure to do so may cause engine damage. Precautions ● The cruise indicator light may blink when the cruise control main switch is turned ON while pushing the RESUME/ACCEL, COAST/SET, or CANCEL switch. To properly set the cruise control system, perform the preceding steps in the order indicated. ● If the cruise control system malfunctions, it cancels automatically. The CRUISE 4-13