1997 Nissan Pickup Owner's Manual - Page 93
1997 Nissan Pickup Manual
Page 93 highlights
CRUISE CONTROL b) Tap the brake pedal; the CRUISE light goes out. c) Turn the main switch off. Both the CRUISE CONT and CRUISE lights go out. The cruise control is automatically cancelled and the CRUISE light goes out if: ● you depress the brake pedal while pushing the ACCEL set switch. ● the vehicle slows down more than 8 MPH (13 km/h) below the set speed. ASD0703 The cruise control allows driving at a fixed speed between 30 and 90 MPH (48 and 145 km/h) without keeping your foot on the accelerator pedal. To turn on the cruise control, push the main switch on. The CRUISE CONT indicator light comes on. To set at cruising speed, accelerate your vehicle to the desired speed, push the COAST/SET switch and release it. The CRUISE light in the instrument panel comes on. Take your foot off the accelerator pedal. Your vehicle maintains the set speed. To pass another vehicle, depress the accelerator pedal. When you release the pedal, the vehicle returns to the previously set speed. ● The vehicle may not maintain the set speed when going up or down steep hills. If this happens, drive without the cruise control. To cancel the preset speed, use one of the following three methods: a) Push the CANCEL button; the CRUISE light goes out. 4-12 ● you depress the clutch pedal (manual transmission), or move the shift lever to the N position (automatic transmission). To reset at a faster cruising speed, use one of the following three methods: a) Depress the accelerator pedal. When the vehicle attains the desired speed, push and release the COAST/SET switch. b) Push and hold the ACCEL set switch. When the vehicle attains the speed you desire, release the switch. c) Push, then quickly release the ACCEL set switch. Each time you do this, the set speed increases by about 1 MPH (1.6 km/h).