2002 Nissan Quest Owner's Manual - Page 184

LHA0089 LHA0095 LHA0093 Removing and installing VCP Press down on the release lever and carefully pull up on the VCP. To install, carefully slide the VCP into the case until you hear it click into place. Do not force the VCP into the console. Make sure no objects are in the console prior to installation. NOTE: The FES may be equipped with a security screw. If you have difficulty removing the VCP, check to see if the security screw is installed. The security screw is located on the driver's side of the console near the floor. The security screw can be removed using a tamper resistant Torx® bit (size T20). If you need assistance, please see your Nissan dealer. REAR SEAT ENTERTAINMENT MODULE (RSEM) (if so equipped) WARNING The driver must not attempt to operate the RSEM while the vehicle is in motion so that full attention may be given to vehicle operation. The RSEM is automatically activated when the vehicle ignition and radio are both turned ON. The headphones symbol illuminates in the front radio display when the rear audio controls are on. Press the three Heater, air conditioner and audio systems 4-41