2004 Nissan Altima Owner's Manual - Page 143
2004 Nissan Altima Manual
Page 143 highlights
Use the and buttons for manual tuning. To move quickly through the channels, hold the tuning buttons down. SEEK tuning Push SEEK/TRACK ( or ). SEEK tuning begins from low to high frequencies or high to low frequencies, depending on which button is pressed, and stops at the next broadcasting station. If using the up button, once the highest broadcasting station is reached, the radio continues in the SEEK mode at the lowest broadcasting station. If using the down button, once the lowest broadcasting station is reached, the radio continues in the SEEK mode at the highest broadcasting station. SCAN tuning Push the SCAN button. SCAN illuminates in the display window. SCAN tuning begins from low to high frequencies. SCAN tuning stops for 5 seconds at each broadcasting station that has sufficient signal strength. When scanning, SCAN blinks in the display. Pushing the SCAN button again during this 5 second period stops SCAN tuning and the radio remains tuned to that station. Station memory operation - Travel Preset is OFF Each preset mode (A, B or C) has 6 presets, capable of storing any combination of AM, FM and FM RDS stations. Press the PRESET ABC button to change between the presets: A→B→C The radio displays icon A, B or C to indicate which set of presets is active. To store a radio station in a preset: 1. Select the desired preset by pressing PRESET ABC. 2. Tune to the desired station. 3. Press the desired station select button (>2 seconds). 4. A beep will sound indicating memorization is complete. 5. Other station select buttons can be set in the same manner. If the battery cable is disconnected, or if the radio fuse opens, the radio memory is canceled. In that case, reset the desired stations. Turning ON Travel Preset 1. Press the TRAVEL preset button (