2010 Nissan Frontier King Cab Owner's Manual - Page 120

To turn on the autolight system: 1. Turn the headlight switch to the AUTO posi1 . tion ᭺ 2. Turn the ignition switch to ON. 3. The autolight system automatically turns the headlights on and off. Initially, if the ignition switch is turned OFF and a door is opened and left open, the headlights remain ON for 5 minutes. If another door is opened during the 5 minutes, then the 5 minute timer is reset. To turn the autolight system off, turn the switch to the OFF, , or position. LIC0835 WIC1427 Be sure you do not put anything on top of 1 located in the top the autolight sensor ᭺ side of the instrument panel. The autolight sensor controls the autolight; if it is covered, the autolight sensor reacts as if it is dark out and the headlights will illuminate. If this occurs while parked with the engine off and the switch in the ON position, your vehicle's battery could become discharged. Headlight beam select 1 ᭺ To select the high beam function, push the lever forward. The high beam lights come on and the light illuminates. Pull the lever back to select the low beam. Pulling and releasing the lever flashes the headlight high beams on and off. 2 ᭺ 3 ᭺ Battery saver system If the ignition switch is placed in the OFF position while the headlight switch is in the or position, the headlights will turn off after 5 minutes. 2-28 Instruments and controls