2010 Nissan Frontier King Cab Owner's Manual - Page 54

7. Check to make sure that the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 3 through 6. After the child restraint is removed and the seat belt fully retracted, the ALR mode (child restraint mode) is canceled. WRS0763 LRS0597 Rear-facing - step 6 6. After attaching the child restraint, test it before you place the child in it. Push it from side to side while holding the child restraint near the seat belt path. The child restraint should not move more than 1 inch (25 mm), from side to side. Try to tug it forward and check to see if the belt holds the restraint in place. If the restraint is not secure, tighten the seat belt as necessary, or put the restraint in another seat and test it again. You may need to try a different child restraint. Not all child restraints fit in all types of vehicles. REAR-FACING CHILD RESTRAINT INSTALLATION USING THE SEAT BELTS - PASSENGER'S SIDE JUMP SEAT (King cab models only) 1-36 Safety-Seats, seat belts and supplemental restraint system