2010 Nissan Frontier King Cab Owner's Manual - Page 68

9. Tighten the tether strap according to the manufacturer's instructions to remove any slack. 10. Check to make sure that the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 3 through 8. After the child restraint is removed and the seat belt is fully retracted, the ALR mode (child restraint mode) is canceled. 1 between the 2. Route the top tether strap ᭺ head restraint and the top of the seatback. 3. Secure the tether strap to the tether anchor 2 on the seatback. point ᭺ 4. Refer back to child restraint installation steps before tightening the tether strap. If you have any questions when installing a top tether strap, consult your NISSAN dealer for details. LRS0572 Front passenger seat (King cab models only) INSTALLING TOP TETHER STRAP (Front passenger seat - King cab models only) Before securing the child restraint with the seat belt, 1. If necessary, raise or remove the head re1 straint to position the top tether strap ᭺ over the top of the seatback. If the head restraint is removed, store it in a secure place. Be sure to reinstall the head restraint when the child restraint is removed. See "Head restraint adjustment" in this section for head restraint adjustment, removal and installation information. 1-50 Safety-Seats, seat belts and supplemental restraint system