2010 Nissan Frontier King Cab Owner's Manual - Page 63

8. Tighten the tether strap according to the manufacturer's instructions to remove any slack. 9. Check to make sure the child restraint is properly secured prior to each use. If the seat belt is not locked, repeat steps 3 through 7. WRS0475 LRS0598 Forward-facing - step 11 10. If the child restraint is installed in the front passenger seat, place the ignition switch in the ON position. The front passenger air bag status light should illuminate. If this light is not illuminated see ЉFront passenger air bag and status lightЉ in this section. Move the child restraint to another seating position. Have the system checked by a NISSAN dealer. After the child restraint is removed and the seat belt is fully retracted, the ALR mode (child restraint mode) is canceled. FOWARD-FACING CHILD RESTRAINT INSTALLATION USING THE SEAT BELTS - FRONT PASSENGER AND PASSENGER'S SIDE JUMP SEAT (King cab models only) Safety-Seats, seat belts and supplemental restraint system 1-45