2010 Nissan Frontier King Cab Owner's Manual - Page 337

INSTALLING FRONT LICENSE PLATE License plate bolt tightening torque: 3.8 - 4.7 ft-lb (5.10 - 6.37 N·m) VEHICLE LOADING INFORMATION WARNING ● It is extremely dangerous to ride in a cargo area inside a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. ● Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. ● Be sure everyone in your vehicle is in a seat and using a seat belt properly. INSTALLING FRONT LICENSE PLATE WITHOUT GROMMETS Use the following steps to mount the front license plate without grommets: 1. Make a shallow hole in each plastic finisher at the location mark (small dimple) using a 0.31 in (8 mm) drill. To avoid damaging the threads behind the finisher, apply only light pressure to the drill. LTI0137 2. Mount the license plate bracket using two 8 mm slotted hex head screws. INSTALLING FRONT LICENSE PLATE WITH GROMMETS Use the following steps to mount the front license plate with grommets: 1. Make holes on the plastic finisher at the location mark (small dimple) using a 0.37 in (9.5 mm) drill. Apply light pressure to the drill. Insert two plastic grommets provided. Install the license plate holder using the two bolts (and washers) provided. 2. Mount the license plate using two M6-14 mm bolts. TERMS It is important to familiarize yourself with the following terms before loading your vehicle: ● Curb Weight (actual weight of your vehicle) - vehicle weight including: standard and optional equipment, fluids, emergency tools, and spare tire assembly. This weight does not include passengers and cargo. Technical and consumer information 9-13