2010 Nissan Frontier King Cab Owner's Manual - Page 144
2010 Nissan Frontier King Cab Manual
Page 144 highlights
WARNING ● Do not use the HomeLinkா Universal Transceiver with any garage door opener that lacks safety stop and reverse features as required by federal safety standards. (These standards became effective for opener models manufactured after April 1, 1982). A garage door opener which cannot detect an object in the path of a closing garage door and then automatically stop and reverse, does not meet current federal safety standards. Using a garage door opener without these features increases the risk of serious injury or death. ● During the programming procedure your garage door or security gate will open and close (if the transmitter is within range). Make sure that people or objects are clear of the garage door, gate, etc. that you are programming. ● Your vehicle's engine should be turned off while programming the HomeLinkா Universal Transceiver. WIC0986 WIC0987 PROGRAMMING HOMELINKா 1. To begin, press and hold the two outer HomeLinkா buttons (to clear the memory) 1 blinks (after 20 until the indicator light ᭺ seconds). Release both buttons. 2. Position the end of the hand-held transmitter 1 - 3 inches (26 - 76 mm) away from the HomeLinkா surface. 3. Using both hands, simultaneously press and hold both the HomeLinkா button you want to program and the hand-held transmitter button. DO NOT release the buttons until step 4 has been completed. 4. Hold down both buttons until the indicator light on the HomeLinkா flashes, changing from a "slow blink" to a "rapidly flashing blink". This could take up to 90 seconds. When the indicator light flashes rapidly, both buttons may be released. The rapidly flashing light indicates successful programming. To activate the garage door or other pro- 2-52 Instruments and controls