2011 Nissan cube Owner's Manual - Page 226

illuminates when the ignition switch is in the ACC or ON position. The ignition switch is equipped with an anti-theft steering lock device. In order for the steering wheel to be locked, it must be turned about 1/6 to the right or left from the straight up position. To lock the steering wheel, push the ignition switch to the OFF position. To unlock the steering wheel, push the ignition switch. SSD0859 When the ignition switch cannot be pushed toward the LOCK position, proceed as follows: 1. Move the selector lever into the P (Park) position. 2. Push the ignition switch to the OFF position. 3. Open the door. The ignition switch will change to the LOCK position. The selector lever can be moved from the P (Park) position if the ignition switch is in the ON position and the brake pedal is depressed. PUSH-BUTTON IGNITION SWITCH OPERATION When the ignition switch is pushed without depressing the brake pedal, the ignition switch position will change as follows: ...Push center once to change to ACC. Push center two times to change to ON. Push center three times to change to OFF. Push center four times to return to ACC. Open or close any door to return to LOCK during the OFF position. A * If the ignition switch position does not change from LOCK when pushing the ignition switch, turn the steering wheel right and left, then push the ignition switch again. If the battery of the vehicle is discharged, the push-button ignition switch position cannot be moved from the LOCK position. Some indicators and warnings for operation are displayed on the meter. (See "WARNING/ INDICATOR LIGHTS AND AUDIBLE REMINDERS" in the "2. Instruments and controls" section.) The ignition lock is designed so that the ignition switch position cannot be switched to LOCK until the selector lever is moved to the P (Park) position. STEERING LOCK (if so equipped) In order for the steering wheel to be locked, it must be turned about 1/8 of a right or left turn from the straight up position. To lock the steering wheel, PUSH the ignition switch to the OFF position. To unlock the steering wheel, push the ignition switch. PUSH-BUTTON IGNITION SWITCH POSITIONS LOCK (Normal parking position) The ignition switch can only be locked in this position. The ignition switch will be unlocked when it is pushed to the ACC position while carrying the Intelligent Key. The indicator light on the ignition switch 5-10 Starting and driving