2011 Nissan cube Owner's Manual - Page 264
2011 Nissan cube Manual
Page 264 highlights
vehicle recovery. Front: 1. Remove the hook cover bumper with a suitable tool. 1 * from the 2 2. Securely install the recovery hook * as illustrated. (The hook is stored under the floor behind the driver's seat.) Make sure that the hook is properly secured in its original position after use. SCE0833 ¯ m models Kro SCE0831 VEHICLE RECOVERY (freeing a stuck vehicle) ¯ m models: Reinstall the hook cover accordKro ing to the following procedure as illustrated. 1. Fit the left bottom edge of the cover the opening at an angle. 1 * in WARNING . . Stand clear of a stuck vehicle. Do not spin your tires at high speed. This could cause them to explode and result in serious injury. Parts of your vehicle could also overheat and be damaged. 2 by aligning 2. Slide the cover into position * A with the opening. the area * 3. Push the cover in while pushing the upper 3 . tab * Pulling a stuck vehicle Do not use the tie down hook for towing or 6-16 In case of emergency
![](/manual_guide/autos/2011-nissan-cube-owners-manual-98025bc/264.png)