2012 Nissan Titan Owner's Manual - Page 184

- Air flows from center and side vents. - Air flows from center and side vents and the front and rear floor outlets. - Air flows mainly from the front and rear floor outlets. - Air flows from defroster outlets and the front and rear floor outlets. The air recirculation mode is only functional when the air flow control mode is in the following positions: or . OFF position: button again to turn air recirculaPush the tion off. Outside air is drawn into the passenger compartment and distributed through the selected outlet. Use the off position for normal heater or air conditioner operation. button to the OFF position 1. Press the for normal heating. The indicator light on button will go off. the 2. Press the air flow control button. 3. Turn the fan control dial to the desired position. 4. Turn the temperature control dial to the desired position between the middle and the hot position. Temperature control dial The temperature control dial allows you to adjust the temperature of the outlet air. To lower the temperature, turn the dial to the left. To increase the temperature, turn the dial to the right. Air conditioner button Start the engine, turn the fan control dial to the button to desired position and push the turn on the air conditioner. The indicator light comes on when the air conditioner is operating. To turn off the air conditioner, push the button again. The air conditioner cooling function operates only when the engine is running. Ventilation This mode directs outside air to the side and center ventilators. button to the OFF position. 1. Press the button will The indicator light on the go off. 2. Press the air flow control button. Air recirculation button ON position: Push the the vehicle. Push the button to recirculate air inside button to the on position when: 3. Turn the fan control dial to the desired position. 4. Turn the temperature control dial to the desired position. ● driving on a dusty road. ● to prevent traffic fumes from entering passenger compartment. ● for maximum cooling when using the air conditioner. HEATER OPERATION Heating This mode is used to direct heated air to the foot outlets. Some air also flows from the defrost outlets. Defrosting or defogging This mode directs the air to the defrost outlets to defrost/defog the windows. Display screen, heater, air conditioner, audio and phone systems 4-15