2012 Nissan Titan Owner's Manual - Page 370

Check the tightness of the tie-down cleat periodically during a trip to make sure the center bolt has not become loose. Install the tie-down cleat as follows: 1. Remove the channel protectors by sliding them out the back of the truck bed. Properly store the channel protectors. 2. Loosen the center bolt completely. LTI0103 3. Insert the cleat into the channel perpendicular to the channel as shown. Then rotate the cleat clockwise 90° and slide it to the desired location. LTI0104 4. Position the cleat so the nubs on the bottom fully seat into the channel detents. Technical and consumer information 9-17