2012 Nissan Titan Owner's Manual - Page 186

The air conditioner cooling function operates only when the engine is running. Cooling This mode is used to cool and dehumidify the air. 1. Press the 2. Press the button to the OFF position. air flow control button. 1. Press the button to the OFF position. button will The indicator light on the go off. 2. Press the air flow control button. ● A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction. ● If the engine coolant temperature gauge indicates engine coolant temperature over the normal range, turn the air conditioner off. See "If your vehicle overheats" in the "In case of emergency" section of this manual. 3. Turn the fan control dial to the desired position. 4. Press the light on the button on. The indicator button will come on. 3. Turn the fan control dial to the desired position. 4. Press the on the button. The indicator light button will come on. 5. Turn the temperature control dial to the desired position. AIR FLOW CHARTS The following charts show the button and dial positions for MAXIMUM AND QUICK heating, cooling or defrosting. For additional information on heating and cooling see "Heater and air conditioner" in this section. The air recirculation ) button should always be in the OFF ( position for heating and defrosting. Operating tips ● Keep the windows closed while the air conditioner is in operation. ● After parking in the sun, drive for 2 or 3 minutes with the windows open to vent hot air from the passenger compartment. Then, close the windows. This allows the air conditioner to cool the interior more quickly. ● The air conditioning system should be operated for approximately 10 minutes at least once a month. This helps prevent damage to the system due to lack of lubrication. 5. Turn the temperature control dial to the desired position. ● For quick cooling when the outside tembutton to perature is high, push the the ON position. The indicator light on button will come on. Be sure to the to the OFF position for norreturn the mal cooling. The indicator light on the button will go off. You may also select MAX A/C for quick cooling. Dehumidified heating This mode is used to heat and dehumidify the air. Display screen, heater, air conditioner, audio and phone systems 4-17