2012 Nissan Titan Owner's Manual - Page 60

2. Position the top tether strap over the top of the seatback and under the head restraint. 2 to the tether 3. Secure the tether strap ᭺ 3 on the seat directly behind anchor point ᭺ the child restraint. 4. Return the seatback to the locked position. 5. Refer to the appropriate child restraint installation procedure steps in this section before tightening the tether strap. If you have any questions when installing a top tether strap, consult your NISSAN dealer for details. LRS0392 WRS0423 Anchor point access INSTALLING TOP TETHER STRAP (Rear bench seat) 2 behind the rear To access the anchor points ᭺ bench seat, tilt the rear seatback forward by 1 behind the seatlifting up on the pull strap ᭺ back. Rear bench seat Before securing the child restraint with the LATCH lower anchors (rear outboard seating positions only) or the seat belt, as applicable, follow these steps. 1. If necessary, raise or remove the head re1 straint to position the top tether strap ᭺ over the top of the seatback. If the head restraint is removed, store it in a secure place. Be sure to reinstall the head restraint when the child restraint is removed. See "Head restraints" in this section for head restraint adjustment, removal and installation information. BOOSTER SEATS Precautions on booster seats WARNING If a booster seat and seat belt are not used properly, the risk of a child being injured in a sudden stop or collision greatly increases: - Make sure the shoulder portion of the belt is away from the child's face and neck and the lap portion of the belt does not cross the stomach. Safety-Seats, seat belts and supplemental restraint system 1-43