2014 Nissan 370Z Owner's Manual - Page 116
2014 Nissan 370Z Manual
Page 116 highlights
PROGRAMMING HomeLink® If you have any questions or are having difficulty programming your HomeLink® buttons, refer to the HomeLink® web site at: www.homelink.com or call 1-800-355-3515. NOTE: It is also recommended that a new battery be placed in the hand-held transmitter of the device being programmed to HomeLink® for quicker programming and accurate transmission of the radio-frequency. 1. Position the end of your hand-held transmitter 1-3 in (26-76 mm) away from the HomeLink® surface, keeping the HomeLink® 1 in view. indicator light * JVI0428X JVI0429X 2. Using both hands, simultaneously press and hold the desired HomeLink® button and handheld transmitter button. DO NOT re1 lease until the HomeLink® indicator light * flashes slowly and then rapidly. When the indicator light flashes rapidly, both buttons may be released. (The rapid flashing indicates successful programming.) NOTE: Some devices to be programmed may require you to replace Step 2 with the cycling procedure noted in the "Programming HomeLink® for Canadian customers and gate openers" (P.2-52). 3. Press and hold the programmed HomeLink® button and observe the indicator light. . If the indicator light * 1 is solid/continuous, programming is complete and your device should activate when the HomeLink® button is pressed and released. . If the indicator light * 1 blinks rapidly for two seconds and then turns to a solid/ continuous light, continue with Steps 4-6 for a rolling code device. A second person may make the following steps easier. Use a ladder or other device. Do not stand on your vehicle to perform the next steps. Instruments and controls 2-51
![](/manual_guide/autos/Nissan-2014-Z-Coupe-Owner-s-Manual-633c86/116.png)