2014 Nissan 370Z Owner's Manual - Page 409
2014 Nissan 370Z Manual
Page 409 highlights
FOR NISMO MODELS Use the following steps to mount the license plate: Before mounting the license plate, confirm that the following parts are enclosed in the vinyl bag...1. License plate bracket J-nut 6 2 Screw 6 4 Screw grommet 6 4 Park the vehicle on flat, level ground. 2. Temporarily place the license plate bracket A of the front bumper while aligning points * B in the license plate fascia with holes * bracket. A and * B are aligned. 3. Confirm that points * Hold the license plate bracket and mark the C on the bumper facia through the points * D with a felt-tip pen. center of the holes * 4. Remove the license plate bracket. A 5. Carefully drill two shallow pilot holes * C using a 0.39 in (10 mm) drill bit at and * the marked locations. (Be sure that the drill only goes through the fascia.) STI0650 6. Insert grommets into the hole on the fascia. 7. Insert a flat-blade screwdriver into the grommet hole to add a 908 turn onto the E . part * 9-16 Technical and consumer information
![](/manual_guide/autos/Nissan-2014-Z-Coupe-Owner-s-Manual-633c86/409.png)