1998 Oldsmobile 88 Owner's Manual - Page 92

As you signal a turn or lane change, if the arrows don't a flash but just stay on, a signal bulb maybe burned out and other drivers won't your turn signal.If a bulbis see If burned out, replaceit to help avoid an accident. the arrows don'tgo on at all when you signal a turn, check the fuse. See "Fuses andCircuit Breakers" in the Index. If you have added wiring towing a trailer, a differenl for turn signal flasher may be used. With this flasher installed, the signal will flash even a turn signal bulb if is burned out. Check the front and rear turn signal lamps regularly to make sure they are working. Headlamp High/Low Beam Changer To change the headlamps from low beam to high beam or high beams low beam, pull the turn signal to lever toward you. Then release it. When the high beams are on, this light on the instrument panel will also beon. lbrn Signal On Chime If your turnsignal is left on for more than3/4 of a mile (1.2km), a chime will sound at each of the turn flash signal. To turn off the chime, movethe turn signal lever to the off position. Flash-To-Pass Feature This feature lets you use your high-beam headlamps to signal a driver front of you that you want pass. It in to works even if your headlamps are off. To use it, pull the turn signal lever toward you a little, but not so far that you hear a click. If your headlamps areoff or on low beam, your high-beam headlamps will turn on. They'll stay on as long as you hold thelever toward you andthe high-beam indicator onthe dash will come on. Release the lever toturn the high-beam headlamps off. 2-33