2008 Polaris Ranger 2x4 Owners Manual - Page 33
2008 Polaris Ranger 2x4 Manual
Page 33 highlights
FEATURES AND CONTROLS Park Brake Lever To help prevent the vehicle from rolling, engage the park brake when parking the vehicle. When the park brake is fully engaged and the park brake indicator is illuminated, engine speed is limited to 1300 RPM in all gears, including neutral. If throttle is applied, this limiting feature prevents operation, which protects the park brake pads from excessive wear. NOTE: This feature will not operate properly if the park brake connector or switch (under the hood) malfunctions or becomes disconnected, or if the switch has moved. Check for disconnection, then see your dealer promptly if this feature fails to operate properly. Always apply the service brakes before engaging or releasing the park brake. 1. Apply the brakes. 2. Pull the park brake lever downward as far as possible. 3. To release the park brake, apply the brakes. Press the park brake release inward and move the lever upward as far as possible. Park Brake Release WARNING Operating the vehicle while the park brake is engaged could cause loss of control and result in serious injury or death. Always disengage the park brake before operating the vehicle. 30