2008 Polaris Ranger 2x4 Owners Manual - Page 75
2008 Polaris Ranger 2x4 Manual
Page 75 highlights
MAINTENANCE Vehicle Immersion CAUTION If your vehicle becomes immersed, major engine damage can result if the machine is not thoroughly inspected. Take the vehicle to your dealer before starting the engine. If it's impossible to take your RANGER to a dealer before starting it, follow the steps outlined below. 1. Move the vehicle to dry land or at the very least, to water below the footrests. 2. Disconnect the fuel pump wires. 3. Remove the spark plug. 4. Place a clean container under the engine and loosen the carburetor drain screw two turns. 5. Turn the engine over several times using the electric start. 6. Inspect the drained fuel for Drain Screw water or sediment. 7. Dry the spark plug and reinstall it, or install a new plug. 8. Tighten the carburetor drain screw. 9. Reconnect the fuel pump wires. 10. Attempt to start the engine. If necessary, repeat the drying procedure. 11. Take the vehicle to your dealer for service as soon as possible, whether you succeed in starting it or not. NOTE: If water has been ingested into the PVT follow the procedure on page 71 for drying. 72