2008 Polaris Ranger 2x4 Owners Manual - Page 66

2008 Polaris Ranger 2x4 Manual

Get 2008 Polaris Ranger 2x4 PDF manuals and user guides View all 2008 Polaris Ranger 2x4 manuals

Page 66 highlights

Gearcases MAINTENANCE Transmission (Main Gearcase) Oil Change The drain plug is located on the bottom of the transmission. Access the drain plug through the drain hole in the skid plate. 1. Remove the fill plug. 2. Place a drain pan under the drain plug. 3. Remove the drain plug. Drain the oil. 4. Wipe the magnetic end of the drain plug clean to remove accumulated metallic filings. 5. After the oil has drained completely, install a new sealing washer. 6. 7. 8. 9. 10. Drain Plug NOTE: Refer to the Gearcase Specifications Chart on page 62 for recommended lubricants, capacities and torque specifications. Reinstall the drain plug. Torque to specification. Add the recommended oil as needed. Do not overfill. Reinstall the fill plug. Torque to specification. Check for leaks. Dispose of used oil properly. 63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
63
MAINTENANCE
Gearcases
Transmission (Main Gearcase)
Oil Change
The drain plug is located on the
bottom of the transmission.
Access the drain plug through the
drain hole in the skid plate.
1.
Remove the fill plug.
2.
Place a drain pan under the
drain plug.
3.
Remove the drain plug. Drain
the oil.
4.
Wipe the magnetic end of the
drain plug clean to remove
accumulated metallic filings.
5.
After the oil has drained
completely, install a new
sealing washer.
NOTE:
Refer to the Gearcase Specifications Chart on page 62 for recom-
mended lubricants, capacities and torque specifications.
6.
Reinstall the drain plug. Torque to specification.
7.
Add the recommended oil as needed. Do not overfill.
8.
Reinstall the fill plug. Torque to specification.
9.
Check for leaks.
10.
Dispose of used oil properly.
Drain Plug