2008 Polaris Ranger 2x4 Owners Manual - Page 72
2008 Polaris Ranger 2x4 Manual
Page 72 highlights
Cooling System MAINTENANCE Radiator Coolant Level Always check and clean the screen and radiator fins at the intervals outlined in the Periodic Maintenance Chart beginning on page 50. Do not obstruct or deflect air flow through the radiator by installing unauthorized accessories in front of the radiator or behind the cooling fan. Interference with the radiator air flow can lead to overheating and consequentially, engine damage. WARNING Escaping steam can cause severe burns. Never remove the pressure cap while the engine is warm or hot. Always allow the engine to cool before removing the pressure cap. 1. Lift the hood. 2. Slowly remove the radiator cap. 3. View the coolant level through the opening. 4. Use a funnel and slowly add coolant as needed. NOTE: This procedure is required only if the cooling system has been drained for maintenance and/or repair. But if the overflow bottle has run dry, the level in the radiator should also be inspected. Radiator Cap NOTE: Use of a non-standard pressure cap will not allow the recovery system to function properly. See your dealer for the correct replacement part. 69