2009 Polaris Ranger 6x6 700 EFI Owners Manual - Page 115

2009 Polaris Ranger 6x6 700 EFI Manual

Page 115 highlights

TROUBLESHOOTING Possible Cause Out of fuel Kinked or plugged fuel vent line Water is present in fuel Fouled or defective spark plugs Worn or defective spark plug wires Incorrect spark plug gap or heat range Loose ignition connections Low battery voltage Incorrect fuel Clogged air filter Other mechanical failure Overheated engine Engine Stops or Loses Power Solution Refuel Inspect and replace Replace with new fuel Inspect, clean and/or replace spark plug See your dealer Set gap to specs or replace plug Check all connections and tighten Recharge the battery to 12.8 VDC Replace with fresh recommended fuel Inspect and clean or replace See your dealer Clean radiator screen and core, clean engine exterior, see your dealer 112

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126

112
TROUBLESHOOTING
Engine Stops or Loses Power
Possible Cause
Solution
Out of fuel
Refuel
Kinked or plugged fuel vent line
Inspect and replace
Water is present in fuel
Replace with new fuel
Fouled or defective spark plugs
Inspect, clean and/or replace spark plug
Worn or defective spark plug wires
See your dealer
Incorrect spark plug gap or heat range
Set gap to specs or replace plug
Loose ignition connections
Check all connections and tighten
Low battery voltage
Recharge the battery to 12.8 VDC
Incorrect fuel
Replace with fresh recommended fuel
Clogged air filter
Inspect and clean or replace
Other mechanical failure
See your dealer
Overheated engine
Clean radiator screen and core, clean
engine exterior, see your dealer