2009 Polaris Ranger 6x6 700 EFI Owners Manual - Page 87

2009 Polaris Ranger 6x6 700 EFI Manual

Page 87 highlights

MAINTENANCE Throttle System Throttle Body/Idle RPM Idle RPM is preset by the manufacturer. If the engine idle speed is not satisfactory, please see your Polaris dealer for adjustment. Throttle Freeplay Adjustment 1. Remove the seat. 2. Locate the throttle cable adjuster. 3. Squeeze the end of the rubber boot and slide it far enough to expose the end of the inline cable adjuster. 4. Loosen the adjuster lock nut. 5. Rotate the boot to turn the adjuster until 1/16" to 1/8" (1.5-3 mm) of freeplay is achieved at the throttle pedal. See page 83. Boot Lock Nut Adjuster NOTE: While adjusting, lightly flip the throttle pedal up and down. 6. Tighten the lock nut. 7. Squeeze the end of the rubber boot and slide it over the cable adjuster to its original position. 84

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126

84
MAINTENANCE
Throttle System
Throttle Body/Idle RPM
Idle RPM is preset by the manufacturer. If the engine idle speed is not
satisfactory, please see your Polaris dealer for adjustment.
Throttle Freeplay Adjustment
1.
Remove the seat.
2.
Locate the throttle cable
adjuster.
3.
Squeeze the end of the rub-
ber boot and slide it far
enough to expose the end
of the inline cable adjuster.
4.
Loosen the adjuster lock
nut.
5.
Rotate the boot to turn the
adjuster until 1/16" to 1/8"
(1.5-3 mm) of freeplay is
achieved at the throttle
pedal. See page 83.
NOTE:
While adjusting, lightly flip the throttle pedal up and down.
6.
Tighten the lock nut.
7.
Squeeze the end of the rubber boot and slide it over the cable
adjuster to its original position.
Boot
Adjuster
Lock Nut