2009 Polaris Ranger 6x6 700 EFI Owners Manual - Page 91

2009 Polaris Ranger 6x6 700 EFI Manual

Page 91 highlights

MAINTENANCE Seat Belts Inspect all three seat belts for proper operation before each use of the vehicle. 1. Push the latch plate into the buckle until it clicks. The latch plate must slide smoothly into the buckle. A click indicates that it's securely latched. 2. Push the red button in the middle of the buckle to make sure it releases freely. 3. Check the belt webbing for wear, cuts or damage. If any irregularities are found, have the seat belt system checked and/or replaced by an authorized Polaris dealer. The RANGER seat belt is adjustable and should be adjusted for both the operator and passengers before drivBolts ing. Although having the belt at 30° is typical for many people, it will not accommodate all body sizes and shapes. Make sure the seat belt is adjusted to the lowest possible lap position before riding. 1. To adjust, loosen the bolts. 2. Reposition both the buckle and retractor. Tighten the bolts. NOTE: The center belt does not self adjust. Before riding, pull on the strap to secure the belt on the lap of the center passenger. WARNING Failure to follow the age recommendations for this vehicle could result in serious injury or death. No one under the age of 16 may operate this vehicle. No one under the age of 5 may ride as a passenger in this vehicle. 88

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126

88
MAINTENANCE
Seat Belts
Inspect all three seat belts for proper operation before each use of the
vehicle.
1.
Push the latch plate into the buckle until it clicks. The latch plate
must slide smoothly into the buckle. A click indicates that it's
securely latched.
2.
Push the red button in the middle of the buckle to make sure it
releases freely.
3.
Check the belt webbing
for wear, cuts or damage.
If any irregularities are
found, have the seat belt
system checked and/or
replaced by an authorized
Polaris dealer.
The
RANGER
seat belt is
adjustable and should be
adjusted for both the operator
and passengers before driv-
ing. Although having the belt
at 30
°
is typical for many peo-
ple, it will not accommodate
all body sizes and shapes.
Make sure the seat belt is
adjusted to the lowest possible lap position before riding.
1.
To adjust, loosen the bolts.
2.
Reposition both the buckle and retractor. Tighten the bolts.
NOTE:
The center belt does not self adjust. Before riding, pull on the strap to
secure the belt on the lap of the center passenger.
WARNING
Failure to follow the age recommendations for this vehicle could result in
serious injury or death. No one under the age of 16 may operate this vehicle.
No one under the age of 5 may ride as a passenger in this vehicle.
Bolts