2015 Polaris RZR 900 XC Owners Manual - Page 104
2015 Polaris RZR 900 XC Manual
Page 104 highlights
MAINTENANCE POLARIS Variable Transmission (PVT) System Belt Replacement/Debris Removal If a belt fails, always clean any debris from the duct and from the clutch and engine compartments when replacing the belt. WARNING! Failure to remove ALL debris when replacing the belt could result in vehicle damage, loss of control and severe injury or death. 1. Allow hot components to cool before performing this procedure. 2. Remove the engine access cover and thoroughly clean all debris from the aluminum debris basket and from the engine compartment. 3. Remove the clutch cover screws and open the clutch cover. (It does not have to be removed from the vehicle.) Remove all debris wrapped in and around the PVT system. Debris Basket Remove ALL Debris Tip: Use the shock/clutch tool from the tool kit to slightly open the sheaves to aid in debris removal and belt installation. (Continued on next page) Insert hooked end of tool. Apply force to opposite end of tool to spread sheaves. (Non-EBS Clutch Shown) 102