2015 Polaris RZR 900 XC Owners Manual - Page 118
2015 Polaris RZR 900 XC Manual
Page 118 highlights
MAINTENANCE Lights Headlight Beam Adjustment The headlight beam can be adjusted slightly upward or downward and to the left or right. 1. Position the vehicle on a level surface. The headlight should be approximately 25 ft. (7.6 m) from a wall. 25 ft. (7.6 m) X X 2 in. (5 cm) 2. Place the transmission in PARK. 3. Measure the distance from the floor to the center of the headlight and make a mark on the wall at the same height. 4. Apply the brakes. Start the engine. Turn the headlights to high beam. 5. Include the weight of a rider on the seat while performing this step. Observe the headlight aim. As a starting point, the most intense part of the headlight beam should be 2 inches (5 cm) below the mark on the Adjustment wall. Adjust to operator Screws preference. 6. Tighten or loosen the three (3) headlight screws on the rear of the headlight to adjust the beam upward or downward or to the left or right. 116