2015 Polaris RZR 900 XC Owners Manual - Page 112
2015 Polaris RZR 900 XC Manual
Page 112 highlights
MAINTENANCE Suspension Settings (RZR S/RZR XC/RZR 4) Front/Rear Spring Preload The factory setting is appropriate for nearly all riding conditions. Since the vehicle is equipped with full skid plates, adjustment is not necessary. If desired, the suspension may be adjusted to maintain vehicle clearance height when carrying loads. Please see your POLARIS dealer for the tool required to make suspension adjustments. Elevate the vehicle slightly for easier adjustment. Factory Preload Settings Location Front Rear RZR S 7 7/8" (200 mm) 3 5/16" (84 mm) RZR XC Edition 4 7/8" (123.2 mm) 1 1/16" (26.7 mm) RZR 4 6 1/2" (165.1 mm) 1 9/16" (39.7 mm) Preload Setting Measurement Follow these guidelines if you make adjustments to this suspension. • Always return the suspension to the factory setting after the load is removed from the vehicle. The increased suspension height will negatively impact vehicle stability when operating without a load. • Always apply the same adjustment setting to all four wheels. • Do not increase the spring preload by more than one inch (25.4 mm) over the factory setting. 110