2005 Subaru Legacy Owner's Manual - Page 149

Keys and doors To activate: Repeat moving the door locking switch to the lock position (toward the front) three times. The odometer/trip meter screen will display "AL ON". When the setting has been successfully changed, a buzzer will sound and the odometer/trip meter screen will display the new setting. ! Arming the system ! To arm the system using remote transmitter 1. Close all windows and the moonroof (if so equipped). 2. Remove the key from the ignition switch. 3. Open the doors and get out of the vehicle. 4. Make sure that the engine hood (and the trunk lid) are locked. 5. Close all doors (and the rear gate on the Station wagon). NOTE You may have the above setting change done by your SUBARU dealer. ! If you have accidentally triggered the alarm system ! To stop the alarm Do any of the following operations: " Insert the key in the door lock of the driver's door and turn it to the unlock position. " Press any button on the remote transmitter. " Turn the ignition switch to the "ON" position (only vehicle with immobilizer). " Cycle the ignition switch from the "LOCK" to "ON" position three times within 5 seconds (only vehicle without immobilizer). UB2211BA : Press to Arm the system. : Press to Disarm the system. 2-24