2005 Subaru Legacy Owner's Manual - Page 232

Instruments and controls ! Compass zone adjustment 1. The zone setting is factory preset to Zone 8. Refer to the "Compass calibration zone" map attached to the end of this manual to verify that the compass zone setting is correct for your geographical location. 2. Press and hold the right button for 3 seconds then release, and the word "ZONE" will briefly appear and then the zone number will be displayed. 3. Press the right hand button repeatedly to cycle the display through all possible zone settings. Stop cycling when the correct zone setting for your location is displayed. 4. Releasing the button for 3 seconds will exit the zone setting mode. jects that you view in convex mirror. ! Remote control mirror switch ! Outside mirrors ! Convex mirror (Passenger side) UB3206CA Objects look smaller in a convex mirror and farther away than when viewed in a flat mirror. Do not use the convex mirror to judge the distance of vehicles behind you when changing lanes. Use the inside mirror (or glance backwards) to determine the actual size and distance of ob- The remote control mirrors operate only when the ignition switch is in the "ON" or "ACC" position. 1. Turn the knob to the "L" side to adjust the left hand mirror or to the "R" side to adjust the right hand mirror. 2. Move the knob in the direction you want to move the mirror. 3. Return the knob to the neutral position to prevent unintentional operation. The mirrors can also be adjusted manually. - CONTINUED - 3-61